Basic Info.
Transport Package
Carton Package
Product Description
K-1000C led strip controller for digital led strips
I. Features of K-1000C system:1. Support 32-65536 level grayscale, correcting with software Gamma.2. Support various point, line and area light sources, various rules and special-shaped processing.3. Support single output port, which can carry a maximum of 512 (DMX IC)/1536 (TTL/SPI) pixels (DMX lamps with a maximum of 512 pixels take three channels as an example).4. The play content can be stored in SD card, which can store up to 32 effect files. The SD card capacity supports 128MB-32GB.5. The controller can be used alone or in cascade. The cascade adopts the photoelectric isolation method, featuring anti-interference and better stability. The cascade distance between two controllers can reach 100m by using pure copper power cord of 0.5 mm2.6. The controller with a loaded IC can be locked in the software with the loaded IC, or can be not locked and adjust the controller's "IC" button to select the loaded IC, which is more flexible and convenient.7. The IC controller for DMX lamps has its own address writing function; in addition, with our LedEdit-K software or above version, you can set the one-key address writing function. 8. Support 3/4/multiple-channel (RGBWYA) pixels or single-channel pixels for loading lamps.9. The built-in effect of the controller supports three channels (RGB) and four channels (RGBW).10. The controller can test the addresses of DMX512 lamps.11. Support enhanced TTL and 485 differential (DMX) signal output.12. The controller has 22 test effects and DMX512 test function.Note: 1. The speed of 512 pixels of lamps on the controller can reach 30 frames/second, the speed of 1024 pixels can reach 25 frames/second, and the speed of 1536 pixels can reach 15 frames/second (The above parameters take the IC data of 1903 protocol as an example, and the data may be different for different ICs)2. A maximum of 512 pixels of international standard DMX512 (1990 protocol) can be loaded. The speed can reach 30 frames/s when loading 170 pixels of international standard, about 20 frames/s when loading 340 pixels of international standard, and about 12 frames/s when loading 512 pixels. II. Support IC (the master controller software chooses K-1000-*):00:UCS19**,UCS29**;TM18**,SM167**,WS28**,GS82**; SK6812 (support up to 1536 pixels)01: SM16716,16726 (support up to 1536 pixels)02: P9813 (support up to 1536 pixels)03: LPD6803 (cancel) (support up to 1536 pixels)04: LX1003,1203 (support up to 1536 pixels)05: WS2801 (support up to 1536 pixels)06: LPD1886 (support up to 1536 pixels)07: TM1913 (support up to 1536 pixels)08: TM1914 (support up to 1536 pixels)09: P9883,P9823 (support up to 1536 pixels)10: DMX (support up to 512 pixels at 250kbps, suggest to load ≤320 pixels)11: DMX 500K (support up to 512 pixels at 500kbps,suggest to load ≤320 pixels)12: DMX 250K-CZF (support up to 512 pixels, suggest to load ≤320 pixels)13: DMX 500K-CZF (support up to 512 pixels, suggest to load ≤320 pixels)14: UCS5603-Test (support up to 1536 pixels)15: UCS5603A (support up to 1536 pixels)16: UCS5603B (support up to 1536 pixels)17: TM1814 (support up to 1536 pixels)18: INK1003 (support up to 1536 pixels)19: APA102 (support up to 1536 pixels)20: UCS8904 (support up to 1536 pixels)21: SM16714 (support up to 1536 pixels)22: SM16813 (support up to 1536 pixels)23: GS8512 (support up to 512 pixels, suggest to load ≤320 pixels)24: QED3110 (support up to 1536 pixels)25: WS2816 (support up to 1536 pixels)26: UCS9812 (support up to 1536 pixels)27: SM16803 (support up to 1536 pixels)28: SM16804 (support up to 1536 pixels)29: UCS2603-T (support up to 1536 pixels)30: UCS2603 (support up to 1536 pixels)Note: 1. Lamps of RGB three channels should select K-1000-RGBW.2. Lamps of RGBW four channels should select K-1000-RGBW.3. Lamps of more than four channels should select K-1000-RGBWYA.4. Lamps of single channel should select K-1000-W. At this time, one channel represents one pixel, and the software effect is white light.III. Controller image:IV. Marking meaning:1. Key meaning:2. Port meaning:Description of display content (6-digit display)4. Frame frequency of speed level:V. Wiring method of general IC lamps (DAT/GND)VI. Wiring method of DMX512IC lamps:1. Wiring diagram of DMX512 differential signal line 2. Wiring diagram of DMX512 single signal line | Key | Normal operation | Key function | Key combination function |
| CHIP | Switch the chip | NA | First press "CHIP" and then "MODE" to enter the Write Address interface; after writing, press "CHIP" and then "MODE" to exit the interface. |
| MODE | Switch the file | In the play interface, press and hold "MODE" to enter the DMX one-key address writing interface. |
| SPEED+ | Speed up | Press "SPEED+" to power on and enter the built-in effect channel setting interface. | Press "SPEED+"/"SPEED-" simultaneously to enter the effect file cycle mode. If the screen displays C C C and flashes, it means the file cycle mode is entered. |
| SPEED- | Slow down | Press "SPEED-" to power on and enter the DMX channel testing interface. |
| DC 5-24V | DC 5-24V power positive input | IN A | Cascade synchronous signal, connect to the OUTA of upper controller |
| GND | DC power negative input | IN B | Cascade synchronous signal, connect to the OUTB of upper controller |
| POWER | Power indicator | OUT A | Cascade synchronous signal, connect to the OUTA of lower controller |
| ERROR | Status indicator | OUT B | Cascade synchronous signal, connect to the IN B of lower controller |
| SD CARD | SD card slot | | |
| GND | Ground wire (negative) | B | Signal - (DAT-) |
| CLK | Clock line (address writing line for DMX lamps) | A | Signal+ (DAT+) |
| DAT | USB cable | | |
| Speed | Frame frequency/sec | Speed | Frame frequency/sec | Speed | Frame frequency/sec | Speed | Frame frequency/sec |
| 1 | 4 frames | 5 | 8 frames | 9 | 14 frames | 13 | 23 frames |
| 2 | 5 frames | 6 | 9 frames | 10 | 16 frames | 14 | 25 frames |
| 3 | 6 frames | 7 | 10 frames | 11 | 18 frames | 15 | 27 frames |
| 4 | 7 frames | 8 | 12 frames | 12 | 20 frames | 16 | 30 frames |
| Appendix: Correspondence table between DMX512 IC codes and IC models |
| 61: UCS512A*/B*,TM512AL1/AB | 64: UCS512C*,TM512AC* | 65: SM1651*-3CH | 66: SM1651*-4CH |
| 67: UCS512D*/TM512AD* | 68: UCS512E* | 70: SM17512* | 71: SM17522* |
| 72: UCS512-F | 73: TM512AC* | 74: SM17500 (general address writing) | 76: SM17500 (write address after the channel number) |
| 77: GS8512 (general address writing) | 78: GS8512 (write single address) | 79: GS8512 (set to no address) | 80: QED512P |
| 81:HI 512D | 82:SM1852* | 83:UCS512-G | |
IX. DMX512 lamp test1. Press the "SPEED-" key to power on and enter the lamp test interface, which displays "0 0 0"2. After about 2s, the controller will enter the lamp address testing interface and the controller displays "A3 0000" - Press "MODE" to start automatically testing of lamp address, and press "CHIP" to switch between auto and manual test.
- After starting testing, press "Mode" to switch the number of test channel (1-99).
- In manual test, press "SPEED+"/"SPEED-" to adjust the test lamp forward and backward.
Note 1: The first Nixie tube indicates the auto or manual mode: A is auto test mode, and C is manual test mode, which can be switched by pressing "CHIP";Note 2: The second Nixie tube indicates the pixel channel (1-99) of lamps: 1 is single-color single-channel lamp; 2 is dual-color dual-channel lamp; 3 is thee-color lamp; 4 is four-color lamp, which can be switched by pressing "MODE";Note 3: The fourth-sixth Nixie tubes indicate the number of lamps.
6. After completing the test, restart the controller and it will enter the normal play mode.
Address:
The Third Industrial Area, Shiyan, Bao′an Strict, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Lights & Lighting
Company Introduction:
Our company specialize in the production of kinds of LED strips, such as COB LED strip, RGB COB LED strips, RGBW COB LED strip, CCT COB LED strip, side COB LED strip, side RGB COB LED strip, digital COB LED strip, magic COB LED strip, flexible neon LED strip, Running water LED strips, LED pixel lights, DOT light source, LED modules, etc. We produce high quality products with best prices. Our lead time is short and we have stock for many products. We can deliver goods to you in a very short time. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
){kind=link}